UFO LED high bay, designed for industrial lighting. Adopting the newest LED lighting technology, longer lifespan, lower maintenance cost, higher efficiency. Uniquedesigned optical light distribution can focus the light to the lighting area, improving the luminaire efficiency, taking the place of traditional HID lamps. The wire is made of flame retardant cable which reaching 90VO grade. Wire in blue (AC input wire), brown, ( AC input wire) and lime-green (earth wire).
- In case of fire, explosion, electronic shock, the install, inspect and maintenance must be operated by professional people.
- Please make sure the power off before operation! Luminaries must be electronic grounding!
- Please make the voltage supplied is available for the luminaries!
- Please make the luminaries working under the limited working temperature!
- In order to guarantee enough air convection, luminaries should not be installed in narrow space!
- All products use constant LED driver, LED chips, 3 years warranty. (under the condition that products are rightly kept, installed, used, and maintenance. Once the products fail be cause of improper used or installed or break the products operation manual, we are not responsible for this
situation. We will repair or replace the broken products during the warranty.
We will charge extra material and labor cost if over warranty.
- Please read the instruction manual careful, all rights reserved.
- All products are subject to change without notice.
- Cut off power before maintenance.
- Clean the glass of LED street light regular to keep good light transmission.
- Clean the dusk on the surface and heat sink regular to keep good heat dissipation.
- Do not use water or strong corrosive liquid to clean the lamp, dry cloth is better.
- Replace LED driver: use screwdriver to open the cover, fetch out the driver.
You can se e three AC wires, Match brown wire with “L”, Blue with “ N”, Kelly or yellow with “ G”. The red or white wire on driver is the positive electrode, black wire is the negative elect rode. Notice, please confirm the positive and negative electrode has not met extremely instead.
Lamp must be vertical suspension and the supporter should
can bear at least 3 times w eight of the lamp. Luminaires should not be installed where it is draught, in case of shaking
Hook installation steps?
- Cut off power before operation.
- Knowing the inside diameter of the luminaires then Choose suitable hook for the luminaires.
- Fix the hook before installation and make the it can bear over 3 times weight of the lamp.
- Connect the lamp with hook and make it is safe.
- Connect the power wire: Brown “L” connect to LIVE; Blue “N” connect to NEUTRAL; Lime- green connect to EARTH/GROUND.
- Light up the luminaires.