Rabu, 17 Juli 2019, WIB

Kamis, 28 Sep 2017, 12:06:12 WIB, 1185 View Mr. Kartled, Kategori : LED Street Light

With the improvement of street light, LED street light, as the main luminaries of street lighting, are widely used. With better performance, it is inevitable trend to use LED replace traditional lamps. Kart LED street lighting, adopting high efficiency optical system, uniform and good vertical light distribution, lower glare, is the perfect solution for LED street lighting.

Key Features:

  • Integrated modular radiator design, smaller, lighter.
  • LUMILEDS led chip, high luminous efficiency, LM80 standard, long life, high stability.
  • Meanwell driver, built-in active PFC function, high conversion efficiency, stable performance.
  • Ø 60mm of pole mounting diameter.
  • Working temperature: -30° C ~ +50 ° C.
  • IP65 protection


 Roads; and secondary roads; streets; residential roads and other road lighting.


Product Show:


Light Distribustion Curve:


Product Dimension (unit:mm):


Product Specifications:


Packing Information:



  1. In case of fire, explosion, electronic shock, the install, inspect and
    maintenance must be operated by professional people.
  2. Please make sure the power off before operation!
  3. Luminaries must be electronic grounding!
  4. Please make the voltage supplied is available for the luminaries!
  5. Please make the luminaries working under the limited working temperature!


  1.  All products use constant LED driver, LED chips, 3 years warranty. (under the condition that products are rightly kept, installed, used, and maintenance. Once the products fail because of improper used or installed or break the products operation manual, we are not responsible for this situation. We will repair or replace the broken products during the warranty. We will charge extra material and labor cost if over warranty.)
  2. Please read the instruction manual careful, all rights reserved.
  3. All products are subject to change without notice.

Maintenance manual?

  1. Cut off power before maintenance.
  2. Clean the glass of LED street light regular to keep good light transmission.
  3. Clean the dusk on the surface and heat sink regular to keep good
    heat dissipation.
  4. Do not use water or strong corrosive liquid to clean the lamp, dry
    cloth is better.
  5. Replace LED driver: use screwdriver to open the cover, fetch out the
    driver. You can see three AC wires, Match brown wire with “L”, Blue with “N”, Kelly or yellow with “G”. The red or white wire on driver is the positive electrode, black wire is the negative electrode. Notice, please confirm the positive and negative electrode has not met extremely instead.

To download datasheet of this product in pdf file, please click the following link:
Kart LED PJ Street Light Datasheet

Kamis, 28 Sep 2017 Kart LED PJ Street Light

Tuliskan Komentar