- In case of fire, explosion, electronic shock, the install, inspect and maintenance must be operated by professional people.
- Please make sure the power off before operation!
- Luminaries must be electronic grounding!
- Please make the voltage supplied is available for the luminaries!
- Please make the luminaries working under the limited working temperature!
- All products use constant LED driver, LED chips, 3 years warranty. (under the condition that products are rightly kept, installed, used,
and maintenance. Once the products fail because of improper used or installed or break the products operation manual, we are not responsible for this situation. We will repair or replace the broken products during the warranty. We will charge extra material and labor cost if over warranty.)
- Please read the instruction manual careful, all rights reserved.
- All products are subject to change without notice.
- Cut off power before maintenance.
- Clean the glass of LED street light regular to keep good light transmission.
- Clean the dusk on the surface and heat sink regular to keep good heat dissipation.
- Do not use water or strong corrosive liquid to clean the lamp, dry cloth is better.
- Replace LED driver: use screwdriver to open the cover, fetch out the driver. You can see three AC wires, Match brown wire with “L”, Blue with
“N”, Kelly or yellow with “G”. The red or white wire on driver is the positive electrode, black wire is the negative electrode. Notice, please confirm the positive and negative electrode has not met extremely instead.